Sandingdrum Ø40mm
Small but with great effect
Sandingdrum Ø40mm
The 40mm sanding drum is perfect for use on CNC and column or bench drilling machines. This means that curved profiles can be easily sanded on any commercially available drilling machine. For mobile use, the 40mm sanding drum can also be clamped in a hand drill or cordless screwdriver.
The steel base is coated in black for the longest possible durability. The elastic rubber knobs are arranged helically with an offset of 5 °. In addition, the tips of the rubber knobs are chamfered by 5 °. This results in a particularly good sanding result, and the sanding sleeve is particularly tight and is secured against slipping.
Optionally, the 40mm sanding drum can also be used with an HSK63F collet holder in a CNC machine. Each Nextools sanding durm is delivered with a 120 grit sanding sleeve.
The steel base is coated in black for the longest possible durability. The elastic rubber knobs are arranged helically with an offset of 5 °. In addition, the tips of the rubber knobs are chamfered by 5 °. This results in a particularly good sanding result, and the sanding sleeve is particularly tight and is secured against slipping.
Optionally, the 40mm sanding drum can also be used with an HSK63F collet holder in a CNC machine. Each Nextools sanding durm is delivered with a 120 grit sanding sleeve.
Technical specifications
Diameter: 40mm
Shaft: 12,7x40mm | ½"
Sanding Height: 120mm
Revolution: up to 3000
Weight: 0,6 Kg
Preferred use:
Hand Machines / Upright Drilling Machines
CNC-Machine (e.g. for small inner radii)
1500
Sanding Abrasive-Lifetime / Meter
126
Sanding Sleeve Circumference / mm
3000
max Revolution